remote control and receiver
CALL ME V17 is a wireless switch consisting of a wireless remote control (single-channel or multi-channel) and a receiver module.
Any CALL ME V17 remote controls can be used to turn the lights on and off and to control the brightness of the luminaires connected to the receiver module.
SPECIFICATIONS
Input
12Vdc, 24Vdc
Output
12Vdc, 24Vdc
Power
72W (24Vdc)
36-72W (12-24Vdc)
Connection system
Micro12 (12Vdc), Micro24 (24Vdc)
Input wiring
150mm
Output wiring
500mm
MARKS AND SYMBOLS
MODELS
CALL ME V17
remote control and receiver set
CALL ME V17 is a multi-purpose system for combining control units and remote controls according to the specific needs. The system is set up simply by pressing the warning light placed on the receiver module and one of the buttons on the remote
control. Each individual set-up is independent, so that an infinite number of remote controls and receiver may be used in the same room without any of them interfering with the others. The signal from the CALL ME V17 remote control activates the control module up to a maximum distance of about 15 metres.
CALL ME V17 RECEIVER
receiver module
12-24Vdc (36-72W) receiver with input wiring with male micro-connector and output wiring with multiple female connectors.
CALL ME V17 (only remote control)
multi-channel (up to 3) dimmable remote control
RC3
Single-channel remote control with on-off and dimmer function.
FINISHES
-
black -
steel
DOWNLOAD
Technical data sheet:
CALL-ME-V17_data-sheet_EN-1.pdf
Installation manual:
3470400_Accessori_Call_Me_installation-manual_r1.pdf3480300-Call-me-V17-manual.pdf