Back-door proximity sensor
In limit-switch mode, IR 2.0 FC turns the luminaire connected to it on and off when the door is opened or closed.
The IR 2.0 FC set-up can be changed from limit switch mode to on/off dimmer switch mode, by pressing the button on the back of the device.



SPECIFICATIONS
Input
12Vdc, 24Vdc
Output
12Vdc, 24Vdc
Power
72W (24Vdc)
36-72W (12-24Vdc)
Connection system
Micro12 (12Vdc), Micro24 (24Vdc)
Input wiring
2000mm
Output wiring
2000mm
MARKS AND SYMBOLS
MODELS
IR 2.0 FC @ 24Vdc
Input: 24Vdc
Output: 24Vdc
Load: 72W
Connector: Micro24
In limit-switch mode, IR 2.0 FC turns the luminaire connected to it on and off when the door is opened or closed. For perfect IR 2.0 FC operation, it is recommended not to use doors with reflective, brilliant or mirrored white surfaces.
Recessed installation on the back edge of door and surface installation in the interior cabinet.
The IR 2.0 FC set-up can be changed by pressing the button for 3 seconds and then switching to the IR 2.0 SD set-up to dimmer switch mode.
IR 2.0 FC @ 12-24Vdc
Input: 12-24Vdc
Output: 12-24Vdc
Load: 36-72W
Connector: Micro12, Micro24
In limit-switch mode, IR 2.0 FC turns the luminaire connected to it on and off when the door is opened or closed. For perfect IR 2.0 FC operation, it is recommended not to use doors with reflective, brilliant or mirrored white surfaces.
Recessed installation on the back edge of door and surface installation in the interior cabinet.
The IR 2.0 FC set-up can be changed by pressing the button for 3 seconds and then switching to the IR 2.0 SD set-up to dimmer switch mode.
DOWNLOAD
Catalogue page:
IR-2.0-FC_data-sheet_EN.pdf
Instruction manual:
3494800_r1_IR_2.0_12-24_instruction_sheet.pdf