programmable electronic touch switch
STM (smart touch mirror) is a programmable electronic touch switch for installation behind mirrors. STM is always supplied wired with a Domus Line power supply with IP44 protection degree. STM can power and control both 12Vdc or 24Vdc static light LED luminaires and dynamic light Tunable White luminaires.



SPECIFICATIONS
Input
230Vac
Output
12Vdc, 24Vdc
Power
60W
Connection system
Micro12, Micro24
MARKS AND SYMBOLS
MODELS
STM
STM allows three different operating programs, each one paired with the three sensors (Switch, CCT and Dimmer).
1. Static LED luminaires
The luminaires are switched on and off with a quick touch (<1 sec.) of the “Switch” sensor.
Brightness can be adjusted from min. 5% to max. 100% with a long touch (>1 sec.).
2. Tunable White LED luminaires
The luminaires are switched on and off with a quick touch (<1 sec.) of the “Switch” sensor.
Brightness can be adjusted from min. 5% to max. 100% with a long touch (>1 sec.).
A quick touch (<1 sec.) of the “CCT” sensor selects the colour temperature (warm white, natural white or cool white), a long touch (>1 sec.) adjusts it dynamically.
3. Tunable White LED luminaires
The luminaires are switched on and off with a quick touch (<1 sec.) of the “Switch” sensor.
A quick touch (<1 sec.) of the “CCT” sensor selects the colour temperature (warm white, natural white or cool white), a long touch (>1 sec.) adjusts it dynamically.
Finally, with a quick touch (<1 sec.) of the “Dimmer” sensor selects the light brightness to a value corresponding to 5%, 30%, 60% or 100% of the maximum intensity; a longer touch (>1 sec.) dynamically adjusts it from min. 5% to max. 100%.
DOWNLOAD
Technical data sheet:
STM_data-sheet_EN.pdf
Installation manual:
3482700_SMART_TOUCH_MIRROR_r3_installation-manual.pdf