APEX COLLECTION
Less is more!
Reducing a luminaire to its essential elements is a challenge that focuses on light engineering performance, easy installation and full integration with the furnishings.
For Domus Line, minimalism is firstly a concept and is then a style.
The APEX collection is the expression of this, it escapes excesses and focuses on the essential.
Every luminaire in the collection expresses its own minimal soul, removing all things superfluous and focusing attention on what really counts in a luminaire to be integrated into the furniture.
PROFILES FOR RECESSED INSTALLATION
IN BLIND GROOVE
DIMMER SWITCH
Simply touch to switch the luminaire on and off or adjust the brightness.
APEX SD
APEX SD is recess installed in a groove, protruding 0.8 – 1 mm from it to hide any irregularities in the edges.
Designed for installation in a 9 mm wide and 11 mm deep blind groove, it is recommended for application under shelves in both living room furniture units and under kitchen units.
SMART FITTING SYSTEM
APEX 79 is supplied with fixing clips that allow the profile to be easily removed from the groove when required.
APEX 79
APEX 79 is designed for recessed installation in a 9 mm wide and 7 mm deep milled groove. Supplied with groove cover heads, the luminaire is recommended for application under shelves in both living room furniture units and beneath kitchen units. APEX 79 is installed in a groove, protruding just 0.5mm from the groove, it hides any irregularities in the edges. APEX 79 is supplied with fixing clips that allow the profile to be easily removed from the groove when required.
DIMMER SWITCH
Simply touch to switch the luminaire on and off or adjust the brightness.
MISS SD
MISS SD combines APEX SD with an elegant aluminium profile supplied with heads and developed for recessed installation under shelves in a 12.3 mm wide and 13.5 mm deep blind groove. The luminaire is recommended for application under shelves in both living room furniture units or under kitchen units and integrates an electronic switch.
SPECIAL ANTI-GLARE EYELID
The light projection is shielded on the user side and projected towards the inside of the lighted compartment.
LAB
LAB combines APEX with an elegant aluminium profile, developed for recessed installation in a 12.3 mm wide, 13.5mm deep blind groove, and has a light anti-glare eyelid to cover the focal point of the luminaire. Recommended for lighting walk-in wardrobes, the aluminium profile was designed to fit the APEX configuration without sensor.
RECESSED PROFILES FOR
IN THROUGH MILLED GROOVE
APEX 86 HI
APEX 86 HI is for recessed installation on a 6.5 mm wide and 8 mm deep milled groove, and integrates a flexible sliding module with 168 LEDs/metre. APEX 86 HI is fully sunken, flush to the panel, without hindering the correct positioning of the shelves and opening systems, particularly suited for application on the sides of kitchen columns. The particular shape, with two micro protrusions, covers any irregularities in the groove edges.
TWO INSTALLATION METHODS
APEX 86 HI can be installed recessed, with the profile completely incorporated inside the groove, or semi-recessed in a groove just 5 mm deep.
APEX H7 HI
Designed for recessed installation on a 9 mm wide and 7 mm deep milled groove, APEX H7 HI is fully sunken, flush to the panel, without hindering the correct positioning of the shelves and opening systems. APEX H7 HI integrates a flexible sliding module with high linear density with 280 LEDs/metre (without an adhesive base, therefore replaceable), proportionate to the profile size and finish, satin with medium opalescence, which guarantees a balanced, uniform luminous flux.
BACK-TO-BACK INSTALLATION
This profile is particularly recommended for back-to-back installations on thin wardrobe side panels.
APEX 84 HI
APEX 84 HI integrates a flexible sliding “side-emitting” module with 180 LEDs/metre, developed specifically for this high-opalescence glossy micro profile, producing a uniform and balanced illuminance. Designed for recessed installation, APEX 84 HI is particularly suited for integration on aluminium structural profiles (bookshelves, walk-in wardrobes, etc.) on a 4 mm wide and 8 mm deep groove.
JUST 4 mm WIDE
The shape of the profile was designed to adhere perfectly to aluminium profile as well as in traditional grooves.
APEX 79 HI
Designed for recessed installation in a 9 mm wide and 7 mm deep milled groove, APEX 79 HI is suited for “edge-to-edge” application on the shelves of open units; protruding just 0.5mm from the groove, the profile covers any irregularities in the groove edges. It integrates a lighting module which has a high linear density of 280 LEDs/metre.
SMART FITTING SYSTEM
APEX 79 HI is supplied with fixing clips that allow the profile to be easily removed from the groove when required.
PROFILES FOR RECESSED INSTALLATION
IN THROUGH MILLED GROOVE
WITH INTEGRATED SENSOR
INFRA-RED LIMIT SENSOR
The sensor is activated when the door is opened or closed, automatically switching the light on or off.
APEX HI IR
APEX HI IR integrates a flexible module with 180 LEDs/metre, for recessed installation in a through milled groove 9 mm wide and 11 mm deep. It is recommended for application on the sides of kitchen columns and wardrobes.
INFRA-RED LIMIT SENSOR
The sensor is activated when the door is opened or closed, automatically switching the light on or off.
MISS HI IR
MISS HI IR combines APEX HI IR with an elegant aluminium profile, developed for recessed installation under shelves in a 12.3 mm wide, 13.5mm deep milled groove. Recommended for lighting inside kitchen cabinets. The infra-red sensor is activated when the door is opened or closed, switching the luminaire on and off.
INFRA-RED LIMIT SENSOR
The sensor is activated when the door is opened or closed, automatically switching the light on or off.
LAB HI IR
LAB HI IR combines APEX HI IR with an elegant aluminium profile, developed for recessed installation in a 12.3 mm wide, 13.5mm deep milled groove, and has a light anti-glare eyelid to cover the focal point of the luminaire. Ideal for lighting wardrobes and walk-in closets. The infra-red sensor is activated when the door is opened or closed, switching the luminaire on and off.
SURFACE
PROFILES
APEX 86 SP
Ideal for lighting in walk-in closets, bookshelves and any other furnishing composition where grooves are not possible. APEX 86 SP combines APEX 86 HI with an aluminium profile used for surface application below shelves. The aluminium profile is designed to cover only partially the polycarbonate profile, which in turn integrates the lighting module, in order to combine a generous light projection with two thin side light strips.
TWO POSSIBLE INSTALLATIONS
APEX 86 SP can be configured for edge-to-edge installation, or “free-standing” with two elegant heads in the same finish as the aluminium profile.
