recessed LED profile with fumé grey diffuser
APEX HI DARK is a micro profile with symmetrical light emission for recessed installation on a through-milled groove, recommended for use on the sides of wardrobes. The diffuser is made of multi-layer co-extrusion, which guarantees a dark finish when the luminaire is switched off, and a “no dots” effect when the luminaire is switched on.
SPECIFICATIONS
Materials
polycarbonate, thermoplastic polymers
Light source
SHE LED module (180 LED/m)
Power
14,4 W/m
Power supply
24 VDC
Length
on request
Cable
2000mm
Application type
under shelf
Installation
recessed
MARKS AND SYMBOLS
ECODESIGN REGULATION
This product contains a light source of energy efficiency class F.
PHOTOMETRY
-
Colour appearance:
super warm whiteColour temperature:
2700 KCRI:
Ra 80 -
Colour appearance:
warm whiteColour temperature:
3000 KCRI:
Ra 80 -
Colour appearance:
natural whiteColour temperature:
4000 KCRI:
Ra 80
MODELS
APEX HI SHE PRO
without sensor
The profile section, with two micro protrusions, hides any irregularities in the groove edges (mouse-bite); with a 0.7mm chamfer at 45° it is also possible to reduce the protrusion from the groove (from 0.8 – 1 mm to 0.4 – 0.6 mm). The end caps, matching the profile, are designed to ensure the centring of the light source and the correct positioning and outlet of the cable which can be radial or axial to the installation surface.
APEX HI DARK integrates a 6 mm wide flexible sliding linear module with 180 LEDs/m (Osram). APEX HI DARK is supplied “made to measure” for lengths up to 3000 mm and is configured for horizontal installation with the output of the 2000 mm power cord.
Power supply not included. To be ordered separately.
FINISHES
-
F60 _ fumé grey
DOWNLOAD
Catalogue page:
APEX-HI-DARK_catalogue-sheet_EN.pdf
Instruction manual:
3478200_APEX_installation-manual_r4.pdf