Recessed polycarbonate LED profile
APEX HI is designed for recessed installation to a through-milled groove 9 mm wide and 11 mm deep. Its length can be adapted to your needs, with a minimum of 300mm and a maximum of 3000mm. APEX HI is recommended for vertical installation on the sides of wardrobes, and on kitchen larders.







SPECIFICATIONS
Materials
polycarbonate, thermoplastic polymers
Light source
SHE LED module (180 LED/m)
HE LED module (120 LED/m) - on request
Power
14,4W/m
Power supply
24Vdc
Length
on request
Cable
2000mm
Application type
wardrobe, kitchen larder
Installation
recessed
MARKS AND SYMBOLS
OTHER CONFIGURATIONS
-
This product is also available in the version with colour temperature control. Click here for more information.
-
This product is also available in the type-approved version for the United States and Canada. Click here for more information.
PHOTOMETRY
-
Colour appearance:
natural white
Colour temperature:
4100 KCRI:
Ra ≥ 80 -
Colour appearance:
warm whiteColour temperature:
2900 KCRI:
Ra ≥ 80 -
Colour appearance:
super warm white
Colour temperature:
2600 KCRI:
Ra ≥ 80
MODELS
APEX HI
Without sensor – for a through milled groove
APEX HI is recommended for vertical installation on the sides of wardrobes, and on kitchen larders.
This profile integrates a stripled with OSRAM Opto Semiconductors diodes.
Led converter not included.
APEX HI IR SXU-DXD
with IR sensor on the top back side of left door or on bottom back side of right door – for a through milled groove.
APEX HI IR has an infrared limit sensor so that the cabinet interior light switches on and off when the door opens and closes. The sensor’s sensitivity depends on the material and finish of the door in front of it. See the installation manual for a detailed list.
APEX HI IR SXU – DXD
Designed for vertical installation with sensor on the top back side of the left door, or with a sensor on the bottom back side of the right door.
This profile integrates a stripled with OSRAM Opto Semiconductors diodes.
Led converter not included.
APEX HI IR DXU-SXD
With IR sensor on the top back side of right door or on bottom back side of left door – for a through milled groove
APEX HI IR has an infrared limit sensor so that the cabinet interior light switches on and off when the door opens and closes. The sensor’s sensitivity depends on the material and finish of the door in front of it. See the installation manual for a detailed list.
APEX HI IR DXU – SXD
Designed for vertical installation with sensor on the top back side of the right door, or with a sensor on the bottom back side of the left door.
This profile integrates a stripled with OSRAM Opto Semiconductors diodes.
Led converter not included.
RECOMMENDED ACCESSORIES
DOWNLOAD
Catalogue page:
APEX-HI_data-sheet_EN.pdf
Instruction manual:
3478200_APEX_installation-manual_r4.pdf