APEX
Recessed polycarbonate LED profile
APEX is a recessed micro LED profile with symmetrical light projection, designed for recessed installation in a blind-milling or in a through-milling (APEX HI) with a width of 9mm and a depth of 11mm, recommended for use under shelves. The shape of the profile, with two micro protrusions, hides any irregularities in the groove edges (mouse-bite); with a 0,7mm chamfer at 45° it is also possible to reduce the protrusion from the groove (from 0,8-1mm to 0,4 -0,6mm).
SPECIFICATIONS
10W/m (dual colour D-Motion)
9,6W/m (dual colour D-Motion Wave)
dual colour D-Motion
dual colour D-Motion Wave
3000K
4000K
2700 - 4000K
MODELS
APEX
without sensor – for blind-milling
Power supply not included.
APEX SD
with sensor-dimmer switch
The sensor-dimmer switch of APEX SD allows switching on, switching off, and adjusting the brightness (10-100%).
The sensor-dimmer switch of APEX D-M SD allows switching on, switching off, adjusting the brightness (10-100%) and selecting of colour temperature in WHC (White Changeable) mode.
The sensor-dimmer switch of APEX D-MWA SD allows progressive switching on, reverse sequence switching off, adjusting the brightness (5-100%), and selecting the colour temperature in WHC (White Changeable) mode.
Power supply not included.
APEX HI
without sensor – for through-milling
Power supply not included.
APEX HI SD
with sensor-dimmer switch – for through-milling
The sensor-dimmer switch of APEX HI SD allows switching on, switching off, and adjusting the brightness (10-100%).
The sensor-dimmer switch of APEX HI D-M SD allows switching on, switching off, adjusting the brightness (10-100%) and selecting of colour temperature in WHC (White Changeable) mode.
The sensor-dimmer switch of APEX HI D-MWA SD allows progressive switching on, reverse sequence switching off, adjusting the brightness (5-100%), and selecting the colour temperature in WHC (White Changeable) mode.
Power supply not included.
APEX HI IR SXU-DXD
with back door sensor – for through-milling
The back door IR (Infrared) sensor allows for the (instant) switching on and switching off (delay of approximately 8 seconds) of the LED profile with opening and closing the door. The sensor’s detection range (max. approximately 300mm) varies depending on the finish and reflectivity of the surface of the door behind which the luminaire is installed. The luminaire integrates an automatic switch-off function that activates after approximately 120 minutes of continuous operation. Refer to instruction sheet for more details.
Power supply not included.
APEX HI IR DXU-SXD
with back door sensor – for through-milling
The back door IR (Infrared) sensor allows for the (instant) switching on and switching off (delay of approximately 8 seconds) of the LED profile with opening and closing the door. The sensor’s detection range (max. approximately 300mm) varies depending on the finish and reflectivity of the surface of the door behind which the luminaire is installed. The luminaire integrates an automatic switch-off function that activates after approximately 120 minutes of continuous operation. Refer to instruction sheet for more details.
Power supply not included.
APEX HI AX
without sensor – for through-milling
Power supply not included.
APEX HI SD AX
with sensor-dimmer switch – for through-milling
The sensor-dimmer switch of APEX HI SD AX allows switching on, switching off, and adjusting the brightness (10-100%).
The sensor-dimmer switch of APEX HI D-M SD AX allows switching on, switching off, adjusting the brightness (10-100%) and selecting of colour temperature in WHC (White Changeable) mode.
The sensor-dimmer switch of APEX HI D-MWA SD AX allows progressive switching on, reverse sequence switching off, adjusting the brightness (5-100%), and selecting the colour temperature in WHC (White Changeable) mode.
Power supply not included.