BLADE-IN
recessed LED profile
BLADE-IN is an LED profile with asymmetrical light projection, designed for recessed installation in a through-milling with a width of 20mm and a depth of 9.5mm, recommended for in-cabinet use. BLADE-IN integrates a single-colour LED module with 280 LEDs/m (UHE).
SPECIFICATIONS
dual colour D-Motion
3100K
4200K
2700 - 4000K
MODELS
BLADE-IN HI DX
without sensor
BLADE-IN DX-OR is configured for horizontal installation with rear light projection and power cord on the right side, alternatively with front light projection and power cord on the left side.
Power supply not included.
BLADE-IN HI SX
without sensor
BLADE-IN SX-OR is configured for horizontal installation with rear light projection and power cord on the left side, alternatively with front light projection and power cord on the right side.
Power supply not included.
BLADE-IN IFR DX-OR
with motion sensor
The PIR (Passive InfraRed) sensor of BLADE-IN IFR DX-OR automatically activates the instant-on and delayed-off (approximately 30 seconds) of the luminaire with the opening and closing of the door of the cabinet where it is installed, as well as with movement within the detection range.
BLADE-IN IFR DX-OR is configured for horizontal installation with rear light projection, sensor and power cord on the right side, alternatively with front light projection, sensor and power cord on the left side.
Power supply not included.
BLADE-IN IFR SX-OR
with motion sensor
The PIR (Passive InfraRed) sensor of BLADE-IN IFR SX-OR automatically activates the instant-on and delayed-off (approximately 30 seconds) of the luminaire with the opening and closing of the door of the cabinet where it is installed, as well as with movement within the detection range.
BLADE-IN IFR SX-OR is configured for horizontal installation with rear light projection, sensor and power cord on the left side (BLADE-IN IFR SX-OR), alternatively with front light projection, sensor and power cord on the right side.
Power supply not included.