Milky flexible LED modules for recessed or on surface installation
FLEXYLED AT6 is a 24Vdc flexible linear LED strip developed using a new milky-effect diffusing silicone coating technology that cancels the characteristic spot effect light emitting diodes. FLEXYLED AT6 has a high-seal 3M© adhesive base and can be installed in grooves or surfaces. Available in three pre-wired modules (200, 300 and 600 cm) wired with double power cable.







SPECIFICATIONS
Materials
flexible LED strip with adhesive
Covering: milky-effect silicone
Light source
UHE LED module (276 LED/m)
Power
20W (2000mm)
30W (3000mm)
60W (6000mm)
Power supply
24Vdc
Length
2000mm
3000mm
6000mm
Cable
2000mm
Application type
universal
Installation
recessed or on surface
MARKS AND SYMBOLS
PHOTOMETRY
-
Colour appearance:
natural whiteColour temperature:
4000 KCRI:
Ra ≥ 90 -
Colour appearance:
super-warm whiteColour temperature:
2700 KCRI:
Ra ≥ 90
MODELS
FLEXYLED AT6
276 LED/m LED module – with double power cable
FLEXYLED AT6 can be divided at 21,7 mm intervals. The double power cable configuration allows the cut part of any of the original modules to be recovered.
Protection rating IP44
Protected from solid bodies greater than 1.0 mm. Protected against water splashes. The protection refers only to the luminaire and not to the connection system.
FLEXYLED AT6 is supplied with a high-strength 3M© adhesive base and also with hooks and fixing screws.
LED converter not included.
RECOMMENDED ACCESSORIES
DOWNLOAD
Catalogue page:
FLEXYLED-AT6_data-sheet_EN-4.pdf
Instruction manual:
3490600_r1_FLEXYLED_AT6_instruction_sheet.pdf