FYNN HI D-M

LED profile for recessed installation with rear optics

FYNN HI D-M is a micro profile with asymmetrical light emission – tilted at a 20° angle – for recessed installation flush to the panel, recommended for use on the sides of wardrobe units. Its particular shape, with two co-extruded micro protrusions in a neutral white or black finish, reduces the dazzle effect. 

SPECIFICATIONS

Materials
polycarbonate, thermoplastic polymers

Light source
dual colour D-Motion CSP module (LED Chip Scale Package) 304+304 LED/m

Power
8 W/m

Power supply
24Vdc

Length
on request

Cable
2000 mm

Application type
on the sides of wardrobe units

Installation
recessed

MARKS AND SYMBOLS

ECODESIGN REGULATION

This product contains a light source of energy efficiency class F.

PHOTOMETRY

  • Colour appearance:
    D-Motion white

    Colour temperature:
    2700 - 4000 K

    CRI:
    Ra 90

MODELS

FYNN HI UHE CSP D-M SX-OR

without sensor

FYNN HI D-M is for installation on a 6.5 mm wide and 8 mm deep milled groove, and integrates a flexible dual colour D-Motion CSP module (LED Chip Scale Package) with 304+304 LED/m.

FYNN HI D-M is supplied “made to measure” for lengths up to 3000 mm. The asymmetrical projection of the light source gives rise to two configurations of the luminaire: SX-OR with the power cord on the left side of the profile and DX-OR on the right side. The two configurations allow any installation, horizontal or vertical, with cable on the upper, lower, right or left side and the wardrobe’s inside or outside light projection (see correlation table).

The end caps are designed to ensure the centring of the light source and the correct positioning and the angle of the cable exit can be 90° or 180° to the surface.

LED converter not included. To be ordered separately.

MODELS: FYNN HI UHE CSP D-M SX-OR - 1 - Domus Line
 

FYNN HI UHE CSP D-M DX-OR

without sensor

FYNN HI D-M is for installation on a 6.5 mm wide and 8 mm deep milled groove, and integrates a flexible dual colour D-Motion CSP module (LED Chip Scale Package) with 304+304 LED/m.

FYNN HI D-M is supplied “made to measure” for lengths up to 3000 mm. The asymmetrical projection of the light source gives rise to two configurations of the luminaire: SX-OR with the power cord on the left side of the profile and DX-OR on the right side. The two configurations allow any installation, horizontal or vertical, with cable on the upper, lower, right or left side and the wardrobe’s inside or outside light projection (see correlation table).

The end caps are designed to ensure the centring of the light source and the correct positioning and the angle of the cable exit can be 90° or 180° to the surface.

LED converter not included. To be ordered separately.

MODELS: FYNN HI UHE CSP D-M DX-OR - 1 - Domus Line
 

FINISHES

  • FINISHES: FYNN HI D-M - white - Domus Line white
  • FINISHES: FYNN HI D-M - black - Domus Line black

    Got a question? Need some help?
    Contact us