LED profiles: FYNN HI

LED profile for recessed installation with rear optics

FYNN HI is a micro profile with asymmetrical light emission – tilted at a 20° angle – for recessed installation flush to the panel, recommended for use on the sides of wardrobe units. Its particular shape, with two co-extruded micro protrusions in a neutral white or black finish, means that the focal point can be pushed back, reducing the dazzle effect.

SPECIFICATIONS

Materials
polycarbonate, thermoplastic polymers

Light source
SHEP LED module (238 LED/m)
SHE LED module (168 LED/m) - on request

Power
10 W/m

Power supply
24Vdc

Length
on request

Cable
2000 mm

Application type
on the sides of wardrobe units

Installation
recessed

MARKS AND SYMBOLS

ECODESIGN REGULATION

This product contains a light source of energy efficiency class G.

PHOTOMETRY

Colour appearance:
natural white

Colour temperature:
4000 K

CRI:
Ra ≥ 80
Colour appearance:
super warm white

Colour temperature:
2800 K

CRI:
Ra ≥ 80

MODELS

without sensor

FYNN HI can be installed on a 6.5mm wide and 8mm deep to a through-milled groove. The asymmetrical projection of the light source gives rise to two configurations of the luminaire: SX-OR with the power cord on the left side of the profile and DX-OR on the right side. The two configurations allow any installation, horizontal or vertical, with cable on the upper, lower, right or left side and the wardrobe’s inside or outside light projection (see correlation table).

LED converter not included. To be ordered separately.