GIRO
remote control and receiver unit
The GIRO collection combines six types of remote controls with corresponding receiving units, enabling control of @24VDC luminaires in single-colour, dual-colour D-Motion, and dual-colour D-Motion Wave luminaires. With the remote—featuring two buttons and a status indicator light—you can manage power on/off, adjust or select both brightness and colour temperature (for D-Motion dual-colour luminaires), and control lighting effects with GIRO D-MWA (for D-Motion Wave dual-colour luminaires) and GIRO NEXT (for all types of light sources).
SPECIFICATIONS
DOWNLOAD
MODELS
GIRO
remote control unit
GIRO F is a one-channel remote control for managing single-colour @24VDC LED luminaires powered by the GIRO E receiving unit. Single presses of the GIRO F ON/OFF button switch the system on or off, while two quick presses in succession reset and realign the brightness level (100%) across all paired receiving units. A quick press of the lower button allows for step-by-step brightness adjustment in loop mode, while holding the button enables smooth dimming control (from 10% to 100%) for all luminaires connected to the GIRO E receiving unit. The remote is supplied with a 3V CR2032 battery and a wall-mount holder. The receiving unit is pre-wired with a power cable and includes six female Micro24 slots. GIRO is also available as a set (GIRO FE) with the remote control and receiving unit pre-paired at the factory.
Power supply not included.
GIRO D-M
remote control unit for D-Motion LED devices
GIRO F D-M is a one-channel remote control designed to manage dual-colour @24VDC D-Motion LED luminaires, powered by the GIRO E D-M receiving unit. Single presses of the ON/OFF button on the GIRO F D-M activate power on and off, while two quick consecutive presses perform a reset and realignment of the brightness level to 100% across all paired receiving units. A long press of the same button enables progressive brightness adjustment from 10% to 100%. Single presses of the lower button allow you to select the colour temperature in WHC3 mode (White Changeable – 3-step) in loop. Two quick consecutive presses reset and realign the colour temperature level to 100% of the coolest tone. A long press of the same button activates TW (Tunable White) mode. The remote control is supplied complete with a 3V CR2032 battery and a wall-mount bracket. The receiving unit is pre-wired with a power cable and includes six female Micro24 slots. GIRO D-M is also available as a set (GIRO FE D-M) with the remote control and receiving unit pre-paired at the factory.
Power supply not included.
GIRO D-MWA
remote control unit for D-Motion Wave LED devices
GIRO F D-MWA is a one-channel remote control for controlling dual-colour @24VDC D-Motion Wave LED luminaires, powered by the GIRO E D-MWA receiving unit. Single presses of the GIRO F D-MWA ON/OFF button initiate progressive switch-on and reverse-sequence switch-off. Two quick presses in sequence perform a reset and realignment of the brightness level to 100% on all paired receiving units. A long press of the same button enables progressive brightness adjustment from 10% to 100%. Single presses of the lower button allow for colour temperature selection in WHC3 mode (White Changeable – 3-step) in a loop. Two quick presses in sequence reset and realign the colour temperature to 100% of the coolest tone on all paired receiving units. A long press of the same button activates TW (Tunable White) mode. The remote control is supplied complete with a 3V CR2032 battery and a wall-mount bracket. The receiving unit is pre-wired with a power cable and includes six female Micro24 slots. GIRO D-MWA is also available as a set (GIRO FE D-MWA) with receiver unit and remote control pre-paired at the factory.
Power supply not included.
GIRO NEXT
remote control unit for sequential switch-on/off
GIRO F is a one-channel remote control for operating single-colour @24VDC LED luminaires, powered by the GIRO NEXT E receiver unit. Single presses of the GIRO F ON/OFF button activate sequential switch-on (from slot 1 to slot 6) and reverse-sequence switch-off, with intervals of approx. 0.25 seconds. A quick press of the lower button allows brightness selection in step-loop mode, while a long press enables progressive dimming (10–100%) of all luminaires connected to the GIRO NEXT E receiving unit. The remote control is supplied complete with a 3V CR2032 battery and wall-mount bracket. The receiver unit is pre-wired with a power cable and includes six Micro24 female slots. GIRO NEXT is also available as a set (GIRO NEXT FE) with receiver unit and remote control pre-paired at the factory.
Power supply not included.
GIRO NEXT D-M
remote control unit for sequential switch-on/off of D-Motion devices
GIRO F D-M is a one-channel remote control for controlling dual-colour @24VDC D-Motion LED luminaires, powered by the GIRO NEXT E D-M receiver. Single presses of the GIRO F D-M ON/OFF button activate sequential switch-on (from slot 1 to slot 6) and reverse-sequence switch-off, with intervals of approx. 0.25 seconds. A long press of the same button enables progressive brightness adjustment from 10% to 100%. Single presses of the lower button allow selection of the colour temperature in WHC3 mode (White Changeable – three-step) in a loop. A long press of the same button activates TW mode (Tunable White). The remote control is supplied complete with a 3V CR2032 battery and a wall-mount bracket. The receiving unit comes pre-wired with a power cable and includes six female Micro24 slots. GIRO NEXT D-M is also available as a set (GIRO NEXT FE D-M) with receiver unit and remote control pre-paired at the factory.
Power supply not included.