HIPSO OB
LED spotlight for surface installation
HIPSO OB is a surface-mounted LED spotlight with asymmetrical light projection, recommended for under-cabinet applications. Made from thermoplastic polymers, it integrates a dimmable dual colour LED perimeter light source and an opaline diffuser.
SPECIFICATIONS
3W (D-MWA)
dual colour D-Motion Wave
MODELS
HIPSO OB
without switch
Power supply not included.
HIPSO OB TDM
with touch-dimmer master switch
The touch-dimmer master switch allows switching on, switching off, adjusting the brightness (5-100%), and selecting of colour temperature in WHC (White Changeable) mode for the individual luminaire and those connected to the output cable of HIPSO OB D-M TDM and HIPSO OB D-MWA TDM.
Power supply not included.
HIPSO OB IFR
with presence sensor
The PIR (Passive InfraRed) sensor automatically activates the instant-on and delayed-off (approximately 30 seconds) of the luminaire with the opening and closing of the door of the cabinet where it is installed, as well as with movement within the detection range. The light source defaults to natural white. By connecting the 2TC jumper cable to the power cable, it is possible to set the light to super warm white. HIPSO OB D-M IFR cannot be controlled by remote D-Motion control systems and must be connected directly to a 24VDC power supply. For further details, refer to the instruction manual.
Power supply not included.