Recessed aluminium LED profile with anti-glare eyelid
LAB HI is designed for recessed installation to a through-milled groove 31/64″ (12.3mm) wide and 17/32″ (13.5mm) deep. Its length can be adapted to your needs, with a minimum of 12″ (300mm) and a maximum of 118″ (3000mm). LAB HI is recommended for horizontal installation in wardrobes. LAB HI has a special eyelid designed to eliminate the glare effect. Light projection is screened from the user and directed towards the inside of the lit compartment. Giuseppe Bavuso design.




SPECIFICATIONS
Materials
aluminium, polycarbonate, thermoplastic polymers
Light source
SHE LED module (55 LED/ft - 180 LED/m)
HE LED module ( 37 LED/ft - 120 LED/m) - on request
Power
4,4W/ft (14,4W/m)
Power supply
24Vdc
Length
on request
Cable
79" (2000mm)
Application type
inside wardrobes
Installation
recessed
MARKS AND SYMBOLS
OTHER CONFIGURATIONS
-
This product is also available in the version with colour temperature control. Click here for more information.
PHOTOMETRY
-
Colour appearance:
natural whiteColour temperature:
4100 KCRI:
Ra ≥ 80 -
Colour appearance:
warm whiteColour temperature:
2900 K
CRI:
Ra ≥ 80 -
Colour appearance:
super warm whiteColour temperature:
2600 K
CRI:
Ra ≥ 80
MODELS
LAB HI
without sensor – for installation in a through milled groove
LAB HI has a special eyelid designed to eliminate the glare effect. Light projection is screened from the user and directed towards the inside of the lit compartment.
This profile integrates a stripled with OSRAM Opto Semiconductors diodes.
LED converter not included.
LAB HI IR SX
with IR sensor on left side – for installation in a through milled groove
LAB HI IR has an infrared end-stop sensor so that the cabinet interior light switches on and off when the door opens and closes. The sensor’s sensitivity depends on the material and finish of the door in front of it. See the installation manual for a detailed list.
Designed for installation on horizontal shelf with sensor on left side.
This profile integrates a stripled with OSRAM Opto Semiconductors diodes.
LED converter not included.
LAB HI IR DX
with IR sensor on right side – for installation in a through milled groove
LAB HI IR has an infrared end-stop sensor so that the cabinet interior light switches on and off when the door opens and closes. The sensor’s sensitivity depends on the material and finish of the door in front of it. See the installation manual for a detailed list.
Designed for installation on horizontal shelf with sensor on right side.
This profile integrates a stripled with OSRAM Opto Semiconductors diodes.
LED converter not included.
RECOMMENDED ACCESSORIES
SIMILAR PRODUCTS
DOWNLOAD
Catalogue page:
LAB-HI_American-Standard_data-sheet_EN.pdf
Instruction manual:
3478600_LAB_installation-manual.pdf3482200_UL_24V_products_warning.pdf