MINI POLY
control unit, infrared and PIR sensors
MINI POLY ECB (Electronic Control Board) is a multi-sensor (max 2) control unit for the common control of single-colour LED luminaires at 12VDC and 24VDC. It is factory preset in “limit switch” mode for configuration with IR-1 sensors for back-door applications.The device is equipped with a button that allows change the setup from “limit switch” to “sensor-dimmer”. In “sensor-dimmer” mode, quick hand movements in front of the sensors activate switching ON and Off. Keeping the hand steady in front of the sensor is possibile to adjusts the brightness (10–100%) of the luminaires connected to the output cable distributor. The control unit can also be configured with PIR (Passive Infrared) motion sensors and touch-dimmer sensors, which are automatically recognized regardless of the preset mode.
SPECIFICATIONS
DOWNLOAD
MODELS
MINI POLY ECB
control unit
The MINI POLY ECB control unit is factory-set to “limit switch” mode for configuration with IR-1 sensors installed behind the door. The setup can be changed by the user at any time from FC (limit switch) to SD (sensor-dimmer) mode and vice versa by pressing the setup button located on the control unit housing. For more details, refer to the instruction manual.
Power supply not included.
IR-1
back-door sensor or touchless sensor
IR-1 is an optical (infrared) sensor that can be installed recessed into a ∅10mm hole or surface-mounted using the spacer supplied in the package. It work as a “limit switch” for back-door installation inside the cabinet, or with ON/Off and dimmer functions depending on the MINI POLY ECB control unit setup.
It is supplied with cable and a male TRIO connector.
TD-1
touch-dimmer switch
TD-1 is a capacitive sensor with a touch-dimmer function that can be installed either recessed into a ∅10mm hole or surface-mounted using the spacer.
It is supplied with cable and a male TRIO connector.
PIR-1
motion sensor
PIR-1 is a motion sensor recommended for use inside wardrobes and walk-in wardrobes, designed for recessed installation into a ∅17mm hole.
It is supplied with cable and a male TRIO connector.
PIR-2
motion sensor
PIR-2 is a motion sensor recommended for use inside wardrobes and walk-in wardrobes, designed for recessed installation into a ∅12.7mm hole.
It is supplied with cable and a male TRIO connector.