SE H4-24 PRO
flexible LED profile
SE H4-24 is an LED profile with symmetrical light projection, designed for flush panel recessed installation in a through-milling with a width of 4mm and a depth of 8mm, recommended for use on any furnishing element. The luminaire is protected from water splashes from all directions, preventing these from penetrating in damaging quantities (IP44).
SPECIFICATIONS
9,6W/m (SE H-24 - SE H4-24 D-M)
dual colour D-Motion
1000mm
2000mm
3000mm
6000mm
SE H-24 and SE H4-24 D-M
1000mm
1500mm
2000mm
2500mm
3000mm
5000mm
4300K (SE H4-24 PRO)
3100K (SE H4-24)
4200K (SE H4-24)
2700 - 4000K (SE H4-24 D-M and SE H4-24 PRO D-M)
MODELS
SE H4-24 PRO
without switch
SE H4-24 PRO integrates a FREE-CUT light source that allows the module to be cut to the desired length at any point of the profile.
The end caps of SE H4-24 PRO are the same size as the profile allowing the entire profile to be flush panel recessed into the groove. The power cord may exit axially or radially to the installation surface.
Power supply not included
SE H4-24 PRO D-M
without switch
SE H4-24 PRO D-M integrates a FREE-CUT light source that allows the module to be cut to the desired length at any point of the profile.
The end caps of SE H4-24 PRO D-M are the same size as the profile allowing the entire profile to be flush panel recessed into the groove. The power cord may exit axially or radially to the installation surface.
Power supply not included
SE H4-24
without switch
Power supply not included
SE H4-24 D-M
without switch
Power supply not included
