SE H4
flexible LED profile
SE H4 is a micro LED profile with symmetrical light projection, designed for flush panel recessed installation in a through-milling with a width of 4mm and a depth of 10mm, recommended for use on any furnishing element. The luminaire is protected from water splashes from all directions, preventing these from penetrating in damaging quantities (IP44). Developed with milky-effect diffusing silicone coating technology, it integrates a single-colour LED module with 120 LEDs/m, divisible every 25mm (3 LEDs).
SPECIFICATIONS
12W (1000mm)
18W (1500mm)
22W (2000mm)
27W (2500mm)
30W (3000mm)
1000mm
1500mm (only SE H4 TD e SE H4 PIR)
2000mm
2500mm
3000mm
4000K
MODELS
SE H4 M12X2
without switch
with two Plug&Play power cables
Power supply not included.
SE H4 M12X2
without switch
with two power cables
Power supply not included.
SE H4 TD
with touch-dimmer switch
The touch-dimmer switch allows switching on, switching off, and adjusting the brightness (10-100%).
Power supply not included.
SE H4 PIR
with motion sensor
The PIR (Passive InfraRed) sensor automatically activates the instant-on and delayed-off (approximately 30 seconds) of the luminaire with the opening and closing of the door of the cabinet where it is installed, as well as with movement within the detection range.
Power supply not included.