TENDY SF
LED profile for kitchen units
TENDY SF IR is a profile with frontward asymmetrical light projection for installation on the side panels of kitchen base units, recommended for use in pull-out baskets. The lateral pressure fixing system (patented) allows TENDY SF with or without screws. The luminaire integrates an IR (Infrared limit switch) sensor that automatically switching it on and off when the door behind which it is installed is opened or closed.
SPECIFICATIONS
4W (450mm)
4,3W (500mm)
5,3W (600mm)
6,3W (700mm)
7,3W (800mm)
8,3W (900mm)
9,3W (1000mm)
11,3W (1200mm)
dual colour D-Motion
450mm
500mm
600mm
700mm
800mm
900mm
1000mm
1200mm
3100K
4200K
2700 - 4000K
G (2700K)
MODELS
TENDY SF IR
with back-door sensor
The IR (Infrared limit switch) sensor of TENDY SF IR allows for the (instant) switching on and switching off (delay of approximately 5 seconds) of the LED profile with opening and closing the door.
The IR (Infrared limit switch) sensor of TENDY SF D-M IR allows for the (instant) switching on, switching off (delay of approximately 5 seconds) and selecting of colour temperature in WHC (White Changeable) mode.
The sensor’s detection range (max. approximately 15mm) varies depending on the finish and reflectivity of the surface of the door behind which the luminaire is installed.
On request, the models with lengths of 800mm or over integrate two sensors that ensure the luminaire switches on when either one of the two doors on the base units is opened. The luminaire integrates an automatic switch-off function that activates after approximately 120 minutes of continuous operation.
Power supply not included.